Search
× Search

NC3000 Coaxial 10 MHz to 67 GHz AWGN

Options

 
NC34opt01   N male output connector
NC34opt02   SMA male output connector
NC34opt03   +15 VDC input voltage
NC34opt04   +28 VDC with regulation
Stabilized output for ±2 V variation
NC34opt05   TTL control “high” is on
(add suffix T)
NC34opt06   SMC male bias connector
NC34opt07     Solder lug for bias connection

Applications

 

  • Implementation Margin of a Satellite Communication System

    The Implementation Margin of a satellite communication system is defined as the degradation of the signal after travelling through the up and downlink equipment. In order to find this, an EbNo generator such as the Noisecom CNG-EbNo Series can first be used to carry out an IF loopback test of the modem in order to find bit error rate (BER) values at different Eb/No ratios. A plot of these values can then be compared with the theoretical curve for the digital modulation scheme being used. The resultant difference is termed the implementation loss of the modem, and this value is used as a reference level for the second part of the test, in which the implementation margin of the complete up and downlink is found.

  • Cold Attenuator Noise Measurements on Cryogenic LNAs

    In the quest to produce Low Noise Amplifiers (LNAs) with the lowest possible noise figures it is common to employ cryogenic techniques to cool the LNA to 20o kelvins (-253o C) or even lower. This has multiple beneficial effects: the minimum noise figure and noise resistance of the low noise transistors in the LNA are both substantially reduced, but also any ohmic losses in the LNA contribute far less thermal noise and indeed the losses themselves are usually substantially reduced as the conductivity of metals generally increases considerably at these low temperatures.

  • Noise Basics

    What Is Noise? All materials produce noise at a power level proportional to the physical temperature of the material. Chinese application note available.

  • Noise by the Numbers

    Learn all you need to know about what noise can do, how it is created, types of noise Noisecom provides and how to control it. It is a great resource to define your noise requirements and identify what Noisecom product or products you can use: component, module or instrument. Chinese application note available.

  • Measuring Crest Factor

    This document provides Noisecom's method of measuring crest factor of a noise source using a LeCroy Wavepro 7200 Oscilloscope. Chinese application note available.

  • Noise-Injection Radiometers

    The radiometer is a sensitive, accurate, calibrated receiver that is used for remote measurement of temperature. Chinese application note available.

  • Calibrating Spectrum Analyzers With a Noise Source

    A simple way to calibrate a spectrum analyzer is to use a broadband white noise source to monitor the analyzer's frequency response. Chinese application note available.

  • Adding Analog Noises to the DOCSIS 3.0 Cable Network

    Injecting Additive White Gaussian Noise (Gaussian Noise) of varying power from Noisecom noise generators into the cable network is an effective way to assess the extent of cable network’s ability to cope with Gaussian Noise interferences of varying intensity. In this application note, we highlight area where Gaussian Noise should be added to examine its impact and uses some of the signal quality metrics to assess the health of the DOCSIS network.

  • Calculating the Max Eb/No Ratio You Can Provide with a Noisecom CNG-EbNo Unit

    Eb/No is a very important parameter for those who work with digital communication systems. Usually this term shows up while discussing bit error rate (BER) or modulation methods in a communication system.

  • Improving Noise Figure Measurement

    Noise Com's NC346 and NC5000 Series are designed to be used with an HP8970 or similar Noise Figure Meter. Chinese application note available.

  • Noise Diodes Randomize Quantization Errors in A/D Converters

    A simple way to calibrate a spectrum analyzer is to use a broadband white noise source to monitor the analyzer's frequency response. Chinese application note available.

 

Connect

9 Entin Road, Suite 101
Parsippany, NJ 07054
United States
Phone: +1 (973) 386-9696
Fax: +1 (973) 386-9191
Email:
info@noisecom.com

Contact Us

Back To Top